Review

Ballistic Metal Raptor

Another great design by Ballistic Metal. The Raptor features a gear-like design along the outside of its brushed stainless finish. As is common with other Ballistic Metal designs, this adornment is on the larger size in height and width which helps with comfort.

The machining on the ring is excellent, as is par for the course, but the inner profile is not as radiused as I would typically ask for… though it is well rounded to ensure comfort. The outer edges are also rounded to minimize pinches and trouble while wearing tight or stiff pants.

Continue reading

Hard Man Outfitters Thick Shaft Rings

Hard Man Outfitters has some unique shaft rings available in much thicker size than you may be used to. These thicker rings offer the boon of a reduced pressure point when erect and a bit more visual interest thanks to the wider ring.

These are easily some of the best shaft rings available - I have a few for swapping into other adornments such as a strap/shaft combo and also keep an available 8mm and 10mm size depending on how the mood strikes me.

Continue reading

3D Printed Finger Ring

As a maker and owner if a 3D Printer, I had the idea to browse the web for ring models that could be scaled to adornment size. I was relatively successful in finding this particular model. After a quick bit of calculation and sizing, the perfect scaling parameters were available and the custom shaft ring ready to print.

I think the results turned out quite nice and this shade of silver provides a handsome accent at the base of a hard on. The only thing I would change for this particular attempt were to use a resin printer for much higher resolution on the print, which would result in a smoother finished product.

Continue reading

Schmuckcockring Priapus Shield

Schmuckcockring makes some really cool custom cock shields. These adornments, of course, surround your cock like any other ring would, but also extends above and below. This adds lots of visual interest by really drawing attention to your member but also serves the added benefit of reducing pinching of no mans land while seated.

This sample form Schmuckcockring is an excellent example of the craftsmanship that goes into the rings. I am not sure what it takes to make a stainless ring, but this one shows no casting marks, manufacturing abrasions, or waviness along the body and ring.

Continue reading

MadeItSwe 3D Printed Wood Ring

This unique adornment is 3D printed from a wood material and finished with a body safe sealant. The design is striking with twisting spokes along the circumference and the curious material to 3d print makes it an obvious buy.

The ring is comfortable to wear despite the spokes which would make one think they pinch and the darker color of the wood is very handsome.

Continue reading

Josielynns Body Jewelry Cherry Keeper Custom Full Erection Design

After finding Josielynn’s shop on Shapeways and trying out a slightly custom design, I was so pleased that I had to try out a fully customized design. Like my favorite Chaste Bird Cage, this design allows for a nearly full erection, but still tightly trapped penis.

The design features cage bars that run the length of the shaft with additional bars along the glans and “no touch” panels at the top and bottom. The 1.375" chosen inner diameter of the cage (my preferred diameter for shaft rings) ensures that the shaft is almost at full girth but still constrained and the 1.75" curved base cock ring provides outflow constriction to keep everything nice and hard while excited. The modular design of Josielynn’s Cherry Keeper series allows for swapping out base rings for other sizes or uncurved rings.

Continue reading

Cock and Shaft Bracelet

While browsing Ebay for stuff I could repurpose to wrap around ny junk, this attractive bracelet stood out as a likely contender. Made of faux leather and accented with silver jewelry bands, all it took to repurpose was a razor knife, tape measure, gorilla glue, and knowledge if the size I wanted.

As I’ve noted in many reviews before, I love cock and shaft combos so this pair of repurposed bracelets created a nicely matching set. As a single or paired adornment, the custom sizing provides for a very nice erection enhancement.

Continue reading

King Rings Woody

Almost identical to the Savage Rose as far as shape, fit, and materials go, the Woody from King Rings takes the design to a less “blingy” direction. The tungsten carbide is finished in midnight black and is accented with Koa and Zebra hardwoods for a gorgeous, but earthy expression.

As with other King Rings, the supremely radiused inner profile and well rounded edges make this adornment as comfortable as your favorite donut cock ring. What that donut ring doesn’t offer, however, is the added pull of the tungsten carbide’s heft!

Continue reading

King Rings Tempest

I mentioned in my review previously of Thunder that I had a little trepidation with going stainless after enjoying the excellent weight of tungsten carbide. Well, needless to say, I loved Thunder enough to buy his younger brother. Tempest continues to carry the torch in terms of quality and beauty. As my seventh King Ring… I knew what to expect when it comes to jewelry quality adornment for my manhood, so jumped at the opportunity of sporting this fresh new design.

Continue reading

King Rings Thunder

As is to be expected from King Rings, the Thunder is an impeccable example of jewelery quality, brilliant design, and eye catching good looks. This is now my sixth ring and, as mentioned in other reviews, I can certainly say that the switch from tungsten carbide to stainless steel has left nothing to be desired. The sharp design, thick heft, and many reflective facets catch lots of light – giving a dazzling presentation to your manhood.

Continue reading